Bhavik Enterprise
D Wing, Mumbai, Maharashtra
GST No. 27AAIFB4432H1ZL
TrustSEAL Verified
Call 0804896998587% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 100 Kg |
| Color | Translucent |
| Shore Hardness | 80 A |
| Packaging Type | Box |
| Type Of Product | Silicon Rubber Bar |
| Temperature Resistance | 150 Degree C |
| Brand | Bhavik |
| Packaging Size | 20 Kg |
| Certification | FDA, ROHS, SGS |
Description: KCC translucent general purpose silicone rubber products are heat-curing silicone rubbers which arewidely used for molding in various industries. They exhibit excellent mill workability, mold release ability.These grades have good rebound resilience and mechanical properties, and are used in various applicationssuch as keypads and kitchenware.
Characteristics:
• Well balanced mechanical properties
• Excellent process ability in compression molding, etc
• Good rebound resilience
• Passing UL 94 HB test
Additional Information:
Product Details:
| Type Of Product | Silicon Rubber Bar |
| Color | White |
| Packaging Type | Box |
| Shore Hardness | 80 A |
| Packaging Size | 20 Kg |
| Tear-Strength | 15 N/mm |
| Tensile Strength | 7 M.Pa |
| Brand | Bhavik |
| Country of Origin | Made in India |
| Apperance | Translucent |
| Description | ||||||||||||||||||||||||||||||||||||
| General Purpose Silicone Rubber Grades Mentioned are Heat cured Silicone Rubber grades used for Molding Extrusion Application. | ||||||||||||||||||||||||||||||||||||
| They have very consistent Properties with Good Performance in Compression Molding Extrusion Processibility. | ||||||||||||||||||||||||||||||||||||
| Widely Used in Applications like Oring, Gasket, Keypad, Molded Parts, Sheets, Hoses, Kitchenware | ||||||||||||||||||||||||||||||||||||
Cake Moulds, Strips Wire, Industrial Products etc.
|
Product Details:
| Minimum Order Quantity | 20 Kg |
| Shore Hardness | 30 - 80 |
| Tear-Strength | 12 N/mm |
| Packaging Size | 20 kg |
| Packaging Type | Box |
| Brand | Berubsil |
| Tensile Strength | 7 M.Pa |
| Color | Translucent |
| Quantity Per Pack | 20 kg |
| Usage/Application | Silicone Rubber Application,Molding Process,Extrusion Process |
| Gravity | 1.10 g/cm3 |
| Extensibility | 700 % |
| Rebound | 60 % |
| Description |
| These products are specially designed for addition cure properly post-cured articles comply with |
| BfR and FDA food contact regulations. |
| Characteristics |
| Excellent process ability in extruding molding |
| Excellent mechanical properties good transparency |
| Non-yellowing |
| Complies with FDA and BfR recommendations for articles in contact with food |
| Applications |
| Food contact articles ( hoses, tubing, Kitchenware, packing ) |
| Healthcare, medical devices ( Catheter balloons, seals, tubing, drains ) |
Additional Information:
Product Details:
| Minimum Order Quantity | 20 Kg |
| Color | white |
| Shore Hardness | 60 & 70 |
| Type Of Product | Silicon Rubber Bar |
| Material | Anti Static Silicone Rubber |
| Packaging Type | 20 kg |
| Elongation | 300 |
| Temperature Resistance | 150-200 "C |
| Quantity Per Pack | 20 kg |
Additional Information:
Product Details:
| Type Of Product | Silicon Rubber Sheet |
| Color | White |
| Packaging Type | Box |
| Shore Hardness | 70 A |
| Certification | ROHS, SGS |
| Elongation | 200 % |
| Tear-Strength | 16 N/mm |
| Tensile Strength | 7.5 M.Pa |
| Brand | Bhavik |
| Country of Origin | Made in India |
| Description | ||||||||||||||||||||||||||||||||||||
| These products are flame retardant grades (UL 94 V-0) respectively. ( UL file NO : QMFZ8.E253047 ) | ||||||||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||||||||
| • Flame retardant level ( UL 94 V-0 ) | ||||||||||||||||||||||||||||||||||||
| • Excellent process ability in molding extruding, etc | ||||||||||||||||||||||||||||||||||||
| • Good mechanical and electrical properties | ||||||||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||||||||
| • Electronic articles ( High voltage cap, Back light holder, special wire ) | ||||||||||||||||||||||||||||||||||||
| • Construction articles ( fire-proof gasket body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Minimum Order Quantity | 20 Kg |
| Color | Black |
| Shore Hardness | 60 A |
| Packaging Type | Box |
| Type of Product | Silicone Rubber Solid |
| Quantity Per Pack | 20 kg |
| Temperature Resistance | 200 Degree C |
| Usage | Industrial |
| Certification | SGS, ROHS |
| Tensile Strength | 6.7 M.Pa |
| Elongation | 520 % |
| Description | ||||||||||||||||||||||||||||||
| The electrically conductive series are heat cured compounds for press molding, extrusion and | ||||||||||||||||||||||||||||||
| calendaring. The Shore A hardness ranges from 60 to 80 | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Electrically conductivity ( Low volume resistivity ) | ||||||||||||||||||||||||||||||
| • Excellent process ability in molding calendaring | ||||||||||||||||||||||||||||||
| • Good mechanical properties | ||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||
| • Electrical conductive articles | ||||||||||||||||||||||||||||||
| ( OA roller, sheet, pad, EMI gasket, keypad contact ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Additional Information:
Product Details:
| Type Of Product | Silicon Rubber Bar |
| Color | Translucent |
| Packaging Type | Box |
| Shore Hardness | 60 A |
| Temperature Resistance | 150 Degree C |
| Certification | SGS, ROHS, FDA |
| Elongation | 400 % |
| Packaging Size | 20 Kg |
| Tear-Strength | 27 N/mm |
| Tensile Strength | 8.5 M.Pa |
| Brand | Bhavik |
| Country of Origin | Made in India |
| Description | ||||||||||||||||||||||||||||||
| KCC translucent general purpose silicone rubber products are heat-curing silicone rubbers which are | ||||||||||||||||||||||||||||||
| widely used for molding in various industries. They exhibit excellent mill workability, mold release ability. | ||||||||||||||||||||||||||||||
| These grades have good rebound resilience and mechanical properties, and are used in various applications | ||||||||||||||||||||||||||||||
| such as keypads and kitchenware. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Well balanced mechanical properties | ||||||||||||||||||||||||||||||
| • Excellent process ability in compression molding, etc | ||||||||||||||||||||||||||||||
| • Good rebound resilience | ||||||||||||||||||||||||||||||
| • Passing UL 94 HB test | ||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Type Of Product | Silicon Rubber Bar |
| Color | Gray |
| Packaging Type | Box |
| Shore Hardness | 80 A |
| Certification | SGS, ROHS |
| Temperature Resistance | 200 Degree C |
| Material | Silicone Rubber |
| Elongation | 240 % |
| Tear-Strength | 17 N/mm |
| Tensile Strength | 4.8 M.Pa |
| Brand | Bhavik |
| Country of Origin | Made in India |
| Description | ||||||||||||||||||||||||||||||
| KCC translucent general purpose silicone rubber products are heat-curing silicone rubbers which are | ||||||||||||||||||||||||||||||
| widely used for molding in various industries. They exhibit excellent mill workability, mold release ability. | ||||||||||||||||||||||||||||||
| These grades have good rebound resilience and mechanical properties, and are used in various applications | ||||||||||||||||||||||||||||||
| such as keypads and kitchenware. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Well balanced mechanical properties | ||||||||||||||||||||||||||||||
| • Excellent process ability in compression molding, etc | ||||||||||||||||||||||||||||||
| • Good rebound resilience | ||||||||||||||||||||||||||||||
| • Passing UL 94 HB test | ||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Type Of Product | Silicon Rubber Bar |
| Color | Transperant |
| Packaging Type | Box |
| Shore Hardness | 9 A |
| Certification | SGS, ROHS |
| Temperature Resistance | 150 Degree C |
| Material | Silicon Rubber |
| Elongation | 1300 % |
| Packaging Size | 20 Kg |
| Tear-Strength | 7 N/mm |
| Tensile Strength | 2.5 M.Pa |
| Brand | Bhavik |
| Description | ||||||||||||||||||||||||||||||
| These products have a low hardness (shore A hardness 9 ~ 20) in the cured state. | ||||||||||||||||||||||||||||||
| They can be used in silicone rubber products such as sporting goods and medical articles that | ||||||||||||||||||||||||||||||
| require a soft feel. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Low Shore A hardness and high elastic elongation property | ||||||||||||||||||||||||||||||
| • Excellent process ability in molding injection | ||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food | ||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||
| • Swimming goods ( swimming caps, goggle bands ) | ||||||||||||||||||||||||||||||
| • Baby care articles ( playthings, covers ) | ||||||||||||||||||||||||||||||
| • Highly elastic articles ( strip, tape ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Minimum Order Quantity | 100 Kg |
| Brand | Bhavik |
| Temperature Resistance | 150-200 "C |
| Shore Hardness | 40 A- 90 |
| Elongation | 550 % |
| Type Of Product | Silicon Rubber Bar |
| Packaging Size | 20 Kg |
| Hardness | 40-50 |
| Quantity Per Pack | 20 KG |
| Color | Transparent |
| Country of Origin | Made in India |
| Material | Silicone Rubber |
| Tensile Strength | 8 M.Pa |
| Packaging Type | Box |
| Tear-Strength | 14 N/mm |
Characteristics: Compliance with FDA and LFGB; good transparency and mechanical properties; good yellowing resistance and stable processability.
Main Applications: They are used in silicone rubber products manufactured with molding, extrusion and platinum curing process.
Additional Information:
Product Details:
| Color | Grey |
| Shore Hardness | 70 A |
| Packaging Type | Box |
| Type Of Product | Silicon Rubber Bar |
| Brand | Bhavik |
| Tensile Strength | 7.2 M.Pa |
| Tear-Strength | 22 N/mm |
| Elongation | 340 % |
| Certification | SGS, ROHS |
| Temperature Resistance | 200 Degree C |
| Country of Origin | Made in India |
| Description | ||||||||||||||||||||||||||||||
| KCC translucent general purpose silicone rubber products are heat-curing silicone rubbers which are | ||||||||||||||||||||||||||||||
| widely used for molding in various industries. They exhibit excellent mill workability, mold release ability. | ||||||||||||||||||||||||||||||
| These grades have good rebound resilience and mechanical properties, and are used in various applications | ||||||||||||||||||||||||||||||
| such as keypads and kitchenware. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| Well balanced mechanical properties | ||||||||||||||||||||||||||||||
| Excellent process ability in compression molding, etc | ||||||||||||||||||||||||||||||
| Good rebound resilience | ||||||||||||||||||||||||||||||
| Passing UL 94 HB test | ||||||||||||||||||||||||||||||
| Complies with FDA and BfR recommendations for articles in contact with food body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Usage/Application | Jewellary, Spin Casting, Die Casting,Prototype |
| Grade Standard | Silicone Rubber |
| Packaging Size | 20 KG |
| Catalyst Type | Peroxide Curing Agent |
| Color | White |
| Model Name/Number | SH7340U |
| Elongation At Break | 900 |
| These products are specially designed for die casting silicone elastomers, in other words, roto | ||||||||||||||||||||||||||||||||||||
| casting and spin casting silicone elastomers. | ||||||||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||||||||
| • Excellent process ability | ||||||||||||||||||||||||||||||||||||
| • Enable to fill with quartz and pigment | ||||||||||||||||||||||||||||||||||||
| • High duty-cycle operation as casting mold | ||||||||||||||||||||||||||||||||||||
| • Good heat resistance with stabilizer SH0008B | ||||||||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||||||||
• Die-casting mold for jewelry, accessory etc
|
Product Details:
| Material | Silicon |
| Type Of Product | Silicon Rubber Bar |
| Color | White |
| Shore Hardness | 90 |
| Temperature Resistance | 150-200 Degree C |
| Model Name/Number | SH1090U |
| Description | ||||||||||||||||||||||||||||||
| This series consist of high hardness silicone rubber compounds which have hardness 90 (Shore A) | ||||||||||||||||||||||||||||||
| in the cured state. These harder grades can be used to adjust the hardness of other grades, | ||||||||||||||||||||||||||||||
| and they also have their own applications | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Super high Shore A hardness 90 | ||||||||||||||||||||||||||||||
| • High Williams plasticity and high green strength | ||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food | ||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||
| • General industry articles ( Key top of keypads, special rollers ) | ||||||||||||||||||||||||||||||
• Food contact articles ( Kitchenware, bottles )
|
Additional Information:
Product Details:
| Type of Product | Silicon Rubber Bar |
| Packaging Type | Box |
| Shore Hardness | 60 |
| Ideal For | High Tensile, High Physical Properties |
| Color | White, Transparent |
| Certification | SGS, ROHS |
| Temperature Resistance | 150-200 Degree C |
| Model Name/Number | SH1660U |
| Description | |||||||||||||||||||||||||||||||||
| These products deliver highly transparent and mechanically strong silicone elastomers which have | |||||||||||||||||||||||||||||||||
| Shore A hardness from 30 to 70 useful by various processing methods ( extruding, molding, calendaring ). | |||||||||||||||||||||||||||||||||
| They have a good heat stability with additive SH0008B | |||||||||||||||||||||||||||||||||
| Characteristics | |||||||||||||||||||||||||||||||||
| • Excellent mechanical and electrical properties | |||||||||||||||||||||||||||||||||
| • Excellent process ability in extruding molding | |||||||||||||||||||||||||||||||||
| • Good transparency | |||||||||||||||||||||||||||||||||
| • Good heat resistance with heat stabilizer SH0008B | |||||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food | |||||||||||||||||||||||||||||||||
| Applications | |||||||||||||||||||||||||||||||||
| • High mechanical strength articles for various industries ( seals, profiles, sheets, gasket ) | |||||||||||||||||||||||||||||||||
• Healthcares food contact articles ( baby cares, hoses, tubing, kitchenware )
|
Product Details:
| Color | White |
| Packaging Type | Box |
| Shore Hardness | 60 |
| Usage | Industrial |
| Application | Anode Caps,Flame Retardant Sheets,UL Certified Products |
| Temperature Resistance | 150-200 Degree C |
| Certification | ROHS |
| Model Name/Number | SH1520U |
| Origin | Korean |
| Description | ||||||||||||||||||||||||||||||||||||
| These products are flame retardant grades (UL 94 V-0) respectively. ( UL file NO ) | ||||||||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||||||||
| • Flame retardant level ( UL 94 V-0 ) | ||||||||||||||||||||||||||||||||||||
| • Excellent process ability in molding extruding, etc | ||||||||||||||||||||||||||||||||||||
| • Good mechanical and electrical properties | ||||||||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||||||||
| • Electronic articles ( High voltage cap, Back light holder, special wire ) | ||||||||||||||||||||||||||||||||||||
• Construction articles ( fire-proof gasket
|
Product Details:
| Type of Product | Silicone Rubber |
| Color | White |
| Packaging Type | Box |
| Shore Hardness | 60 |
| Certification | ROHS |
| Temperature Resistance | 250-300 "C |
| Model Name/Number | SH7760U |
| Type | High Temperature |
| Description | |||||||||||||||||||||||||||||||||||||||||||||
| This product has a heat resistant properties at high temperature and excellent mechanical properties. | |||||||||||||||||||||||||||||||||||||||||||||
| Characteristics | |||||||||||||||||||||||||||||||||||||||||||||
| Excellent heat resistant at over 250 degree Celsius | |||||||||||||||||||||||||||||||||||||||||||||
| Excellent mechanical properties | |||||||||||||||||||||||||||||||||||||||||||||
| Applications | |||||||||||||||||||||||||||||||||||||||||||||
| Heat resistant parts ( Gaskets, Seals, Boots, Wires ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Size | 20 kg |
| Brand | Berubsil |
| Color | White |
| Packaging Type | Box |
| Type | High Dielectric Silicone Rubber |
| Material | Dielectric Constant 15 - 40 |
| Usage/Application | Shrinkable Cable Accessories |
| Tensile Strength | 7.5 |
Potential Applications
Product Details:
| Type | Compound/Bale |
| Color | White |
| Hardness | 30-40 |
| Packaging Type | Box |
| Temperature Resistance | 150-200 Degree C |
| Description | ||||||||||||||||||||||||||||||
| These products are specially designed for addition cure properly post-cured articles comply with | ||||||||||||||||||||||||||||||
| BfR and FDA food contact regulations. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| Excellent process ability in extruding molding | ||||||||||||||||||||||||||||||
| Excellent mechanical properties good transparency | ||||||||||||||||||||||||||||||
| Non-yellowing | ||||||||||||||||||||||||||||||
| Complies with FDA and BfR recommendations for articles in contact with food | ||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||
| Food contact articles ( hoses, tubing, Kitchenware, packing ) | ||||||||||||||||||||||||||||||
| Healthcare, medical devices ( Catheter balloons, seals, tubing, drains ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Material | Silicon |
| Type of Product | Silicone Rubber |
| Color | White |
| Packaging Type | 20KG BOX |
| Shore Hardness | 60 |
| Certification | ROHS |
| Temperature Resistance | 150-200 "C |
| Description | ||||||||||||||||||||||||||||||||||||
| These products designed for high dynamic articles ( keypads, single key domes ) | ||||||||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||||||||
| • Excellent dynamic durability | ||||||||||||||||||||||||||||||||||||
| • High rebound resiliency | ||||||||||||||||||||||||||||||||||||
| • Excellent process ability in molding | ||||||||||||||||||||||||||||||||||||
| • High dispersion degree | ||||||||||||||||||||||||||||||||||||
| • Low compression set | ||||||||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||||||||
| • Electronic articles ( Dynamic keypad, key board, key switch ) | ||||||||||||||||||||||||||||||||||||
| • Various industrial uses for high durability body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Additional Information:
Product Details:
| Type of Product | Silicone Rubber |
| Color | White |
| Packaging Type | Box |
| Shore Hardness | 40 |
| Temperature Resistance | 150-200 Degree C |
| Certification | ROHS |
| Description | ||||||||||||||||||||||||||||||||||||
| These products designed for high dynamic articles ( keypads, single key domes ) | ||||||||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||||||||
| • Excellent dynamic durability | ||||||||||||||||||||||||||||||||||||
| • High rebound resiliency | ||||||||||||||||||||||||||||||||||||
| • Excellent process ability in molding | ||||||||||||||||||||||||||||||||||||
| • High dispersion degree | ||||||||||||||||||||||||||||||||||||
| • Low compression set | ||||||||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||||||||
| • Electronic articles ( Dynamic keypad, key board, key switch ) | ||||||||||||||||||||||||||||||||||||
| • Various industrial uses for high durability body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Usage | Industrial |
| Type of Product | Silicone Rubber |
| Color | White |
| Shore Hardness | 50 |
| Certification | ROHS |
| Temperature Resistance | 150 - 200 Degree C |
| Description | ||||||||||||||||||||||||||||||||||||
| These products designed for high dynamic articles ( keypads, single key domes ) | ||||||||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||||||||
| • Excellent dynamic durability | ||||||||||||||||||||||||||||||||||||
| • High rebound resiliency | ||||||||||||||||||||||||||||||||||||
| • Excellent process ability in molding | ||||||||||||||||||||||||||||||||||||
| • High dispersion degree | ||||||||||||||||||||||||||||||||||||
| • Low compression set | ||||||||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||||||||
| • Electronic articles ( Dynamic keypad, key board, key switch ) | ||||||||||||||||||||||||||||||||||||
| • Various industrial uses for high durability body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Usage/Application | Industrial |
| Type | Silicone Rubber |
| Shore Hardness | 60 |
| Packaging Type | Box |
| Temperature Resistance | 150-200 Degree C |
| Color | White |
| Description | |||||||||||||||||||||||||||
| These products have Shore A hardness 60, 70 and 75 silicone rubber with high green strength, | |||||||||||||||||||||||||||
| which enhance by various processing methods, such as calendaring, extrusion | |||||||||||||||||||||||||||
| Characteristics | |||||||||||||||||||||||||||
| • High green strength to make huge sized extrusion hose | |||||||||||||||||||||||||||
| • High dimensional stability to make calendared sheets | |||||||||||||||||||||||||||
| • Excellent mechanical adhesion properties | |||||||||||||||||||||||||||
| Applications | |||||||||||||||||||||||||||
| • Automotives hose ( Turbo charger hose, Intercooler hose, water hose ) | |||||||||||||||||||||||||||
| • Huge sized extrusion hose ( Corona sleeve tube ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Color | Multi Color |
| Packing Type | Box |
| Usage/Application | Class VI |
| Material | Silicone Rubber |
| Grade | Platinum Silicone |
| Hardness | 60 |
| Description | ||||||||||||||||||||||||||||||
| These products are specially designed for addition cure properly post-cured articles comply with | ||||||||||||||||||||||||||||||
| BfR and FDA food contact regulations. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| Excellent process ability in extruding molding | ||||||||||||||||||||||||||||||
| Excellent mechanical properties good transparency | ||||||||||||||||||||||||||||||
| Non-yellowing | ||||||||||||||||||||||||||||||
| Complies with FDA and BfR recommendations for articles in contact with food | ||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||
| Food contact articles ( hoses, tubing, Kitchenware, packing ) | ||||||||||||||||||||||||||||||
| Healthcare, medical devices ( Catheter balloons, seals, tubing, drains ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Type of Product | Silicon Rubber Bar |
| Color | White |
| Packaging Type | Box |
| Shore Hardness | 70 |
| Temperature Resistance | 150-200 Degree C |
| Model Name/Number | GP70 |
| Description | ||||||||||||||||||||||||||||||||||||
| General Purpose Silicone Rubber Grades Mentioned are Heat cured Silicone Rubber grades used for Molding Extrusion Application. | ||||||||||||||||||||||||||||||||||||
| They have very consistent Properties with Good Performance in Compression Molding Extrusion Processibility. | ||||||||||||||||||||||||||||||||||||
| Widely Used in Applications like Oring, Gasket, Keypad, Molded Parts, Sheets, Hoses, Kitchenware | ||||||||||||||||||||||||||||||||||||
Cake Moulds, Strips Wire, Industrial Products etc.
|
Product Details:
| Minimum Order Quantity | 20 Kg |
| Quantity Per Pack | 20 kg |
| Type of Product | Silicon Rubber Bar |
| Material | Silicon |
| Temperature Resistance | 150-200 Degree C |
| Is It Customized | Non Customized |
| Usage/Application | Silicone Rubber Application,Molding Process,Extrusion Process |
| Color | Translucent |
| Shore Hardness | 40 |
| Packaging Type | BOX |
| Description | ||||||||||||||||||||||||||||||||||||
| General Purpose Silicone RubberGrades Mentioned are Heat cured Silicone Rubber grades used for Molding Extrusion Application. | ||||||||||||||||||||||||||||||||||||
| They have very consistent Properties with Good Performance in Compression Molding Extrusion Processibility. | ||||||||||||||||||||||||||||||||||||
| Widely Used in Applications like Oring, Gasket, Keypad, Molded Parts, Sheets, Hoses, Kitchenware | ||||||||||||||||||||||||||||||||||||
Cake Moulds, Strips Wire, Industrial Products etc.
|
Additional Information:
Product Details:
| Shore Hardness | 30 |
| Material | Silicone Rubber |
| Shape | slabs |
| Color | Black |
| Type of Product | Silicon Rubber Bar |
| Brand | BERUBSIL |
| Usage/Application | Silicone Rubber Application,Molding Process,Extrusion Process |
| Quantity Per Pack | 20 kg |
| Hardness | 30-40 |
| Temperature | 150-200 DEGREE |
| Packaging Type | Box |
| Temperature Resistance | 150-200 Degree C |
| Description | ||||||||||||||||||||||||||||||||||||
| General Purpose Silicone Rubber Grades Mentioned are Heat cured Silicone Rubber grades used for Molding Extrusion Application. | ||||||||||||||||||||||||||||||||||||
| They have very consistent Properties with Good Performance in Compression Molding Extrusion Processibility. | ||||||||||||||||||||||||||||||||||||
| Widely Used in Applications like Oring, Gasket, Keypad, Molded Parts, Sheets, Hoses, Kitchenware | ||||||||||||||||||||||||||||||||||||
Cake Moulds, Strips Wire, Industrial Products etc.
|
Additional Information:
Product Details:
| Color | Translucent |
| Hardness | 50-60 |
| Packaging Type | Box |
| Type Of Product | Silicon Rubber Bar |
| Temperature Resistance | 200 Degree C |
| Brand | Bhavik |
| Tensile Strength | 9 M.Pa |
| Tear-Strength | 26 N/mm |
| Packaging Size | 20 Kg |
| Elongation | 500 % |
| Certification | ROHS, FDA, SGS |
| Country of Origin | Made in India |
| Description | ||||||||||||||||||||||||||||||
| KCC translucent general purpose silicone rubber products are heat-curing silicone rubbers which are | ||||||||||||||||||||||||||||||
| widely used for molding in various industries. They exhibit excellent mill workability, mold release ability. | ||||||||||||||||||||||||||||||
| These grades have good rebound resilience and mechanical properties, and are used in various applications | ||||||||||||||||||||||||||||||
| such as keypads and kitchenware. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Well balanced mechanical properties | ||||||||||||||||||||||||||||||
| • Excellent process ability in compression molding, etc | ||||||||||||||||||||||||||||||
| • Good rebound resilience | ||||||||||||||||||||||||||||||
| • Passing UL 94 HB test | ||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Usage/Application | Ortho Products, Diabetic Shoes Sole |
| Brand | Bhavik |
| Hardness | 10 Shore A |
| Material | Silicon |
| Gravity | 1.06 |
| Tear-Strength | 9 N/mm |
| Description | ||||||||||||||||||||||||||||||
| These products have a low hardness (shore A hardness 9 ~ 20) in the cured state. | ||||||||||||||||||||||||||||||
| They can be used in silicone rubber products such as sporting goods and medical articles that | ||||||||||||||||||||||||||||||
| require a soft feel. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Low Shore A hardness and high elastic elongation property | ||||||||||||||||||||||||||||||
| • Excellent process ability in molding injection | ||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food | ||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||
| • Swimming goods ( swimming caps, goggle bands ) | ||||||||||||||||||||||||||||||
| • Baby care articles ( playthings, covers ) | ||||||||||||||||||||||||||||||
| • Highly elastic articles ( strip, tape ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Type Of Product | Silicon Rubber Bar |
| Packaging Type | 20 Kg |
| Shore Hardness | 20 A |
| Certification | ROHS, SGS |
| Temperature Resistance | 200 Degree C |
| Tear-Strength | 15 N/mm |
| Tensile Strength | 6 M.Pa |
| Brand | Bhavik |
| Description | ||||||||||||||||||||||||||||||
| These products have a low hardness (shore A hardness 9 ~ 20) in the cured state. | ||||||||||||||||||||||||||||||
| They can be used in silicone rubber products such as sporting goods and medical articles that | ||||||||||||||||||||||||||||||
| require a soft feel. | ||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||
| • Low Shore A hardness and high elastic elongation property | ||||||||||||||||||||||||||||||
| • Excellent process ability in molding injection | ||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food | ||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||
| • Swimming goods ( swimming caps, goggle bands ) | ||||||||||||||||||||||||||||||
| • Baby care articles ( playthings, covers ) | ||||||||||||||||||||||||||||||
| • Highly elastic articles ( strip, tape ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Type of Product | Silicone Rubber |
| Color | White, Grey |
| Packaging Type | Box |
| Shore Hardness | 80 |
| Certification | ROHS |
| Features | Non Post Cure,Heat Resistanct,Low Compression Set |
| Brand | Imported |
| Description |
| These products are designed to have excellent compression sets without post curing. |
| Characteristics |
| • Low compression set without post cure |
| Applications |
| • General industry articles |
| ( OA roller, packing, gasket, sheet, seal, O-ring ) |
| PHYSICAL PROPERTIES | ||
| APPERANCE | BEIGE | |
| PLASTICTIY | 250 | |
| SPECIFIC GRAVITY | 1.43 | |
| HARDNESS | Shore A | 80 |
| TENSILE STRENGTH | Mpa | 7.2 |
| ELONGATION | % | 130 |
| TEAR STRENGTH | N/mm | 18 |
| LINEAR SHRINKAGE | % | 3.0 |
| RESILIENCE | % | 53 |
| COMPRESSION SET | % | 10 |
Product Details:
| Model Name/Number | SH6560U |
| Color | Black |
| Type Of Product | Silicone Rubber |
| Packaging Type | Box |
| Temperature Resistance | 200-250 "C |
| Shore Hardness | 60 |
Additional Information:
Product Details:
| Usage | Industrial |
| Type of Product | Silicon Rubber Bar |
| Color | White |
| Packaging Type | 20 kg |
| Shore Hardness | 50 |
| Temperature Resistance | 150-200 Degree C |
| Description | ||||||||||||||||||||||||||||||||||||
| General Purpose Silicone Rubber Grades Mentioned are Heat cured Silicone Rubber grades used for Molding Extrusion Application. | ||||||||||||||||||||||||||||||||||||
| They have very consistent Properties with Good Performance in Compression Molding Extrusion Processibility. | ||||||||||||||||||||||||||||||||||||
| Widely Used in Applications like Oring, Gasket, Keypad, Molded Parts, Sheets, Hoses, Kitchenware | ||||||||||||||||||||||||||||||||||||
Cake Moulds, Strips Wire, Industrial Products etc.
|
Product Details:
| Type of Product | Silicon Rubber Bar |
| Packaging Type | 20 KG |
| Shore Hardness | 20 |
| Color | White |
| Temperature Resistance | 150-200 Degree C |
| Material | Silicone Rubber |
| Model Name/Number | GP20 |
| Description | |||||||||||||||||||||||||||||||||
| These Grades have Low hardess with high Elongation Properties. | |||||||||||||||||||||||||||||||||
| They have very consistent Properties with Good Performance in Processing | |||||||||||||||||||||||||||||||||
| Widely Used in Applications like which required Low Hardness Molded Goods. | |||||||||||||||||||||||||||||||||
Used in Industrial, Medical and Sports Goods Application with High Elongation.
|
Product Details:
| Color | Black |
| Type | Silicone Hose Turbo |
| Shore Hardness | 70 |
| Packaging Type | Box |
| Temperature Resistance | 200-250 Degree C |
| Certification | ROHS |
| Description | |||||||||||||||||||||||||||
| These products have Shore A hardness 60, 70 and 75 silicone rubber with high green strength, | |||||||||||||||||||||||||||
| which enhance by various processing methods, such as calendaring, extrusion | |||||||||||||||||||||||||||
| Characteristics | |||||||||||||||||||||||||||
| • High green strength to make huge sized extrusion hose | |||||||||||||||||||||||||||
| • High dimensional stability to make calendared sheets | |||||||||||||||||||||||||||
| • Excellent mechanical adhesion properties | |||||||||||||||||||||||||||
| Applications | |||||||||||||||||||||||||||
| • Automotives hose ( Turbo charger hose, Intercooler hose, water hose ) | |||||||||||||||||||||||||||
| • Huge sized extrusion hose ( Corona sleeve tube ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Product Details:
| Minimum Order Quantity | 1000 Kg |
| Type | Compound/Bale |
| Color | Translucent |
| Heat Resistance | Yes |
| Usage/Application | Silicone Rubber Application |
| Hardness | 40-50 |
| Shore Hardness | 30 ~ 80 |
| Packaging Type | Box |
| Quantity Per Pack | 20 kg |
| Temperature Resistance | 200-250 Degree C |
| Temperature | 200 |
| Description | |||||||||||||||||||||||||||||||||
| These products have excellent mechanical properties including high tear strength and they are used | |||||||||||||||||||||||||||||||||
| for applications such as parts with complicated shapes, large molded parts, etc. | |||||||||||||||||||||||||||||||||
| SH7340U and SH7255U show good heat stability by themselves, SH7060U and SH7070U | |||||||||||||||||||||||||||||||||
| show good heat stability with additive SH0008B. | |||||||||||||||||||||||||||||||||
| Characteristics | |||||||||||||||||||||||||||||||||
| • High tear strength high tensile strength | |||||||||||||||||||||||||||||||||
| • Excellent process ability in molding extruding, etc | |||||||||||||||||||||||||||||||||
| • Good heat resistance ( SH7340U and SH7255U ) | |||||||||||||||||||||||||||||||||
| • Complies with FDA and BfR recommendations for articles in contact with food ( SH7060U and SH7070U ) | |||||||||||||||||||||||||||||||||
| Applications | |||||||||||||||||||||||||||||||||
| • General industry parts ( Rubber labels textile, Spin-casting, sheets, gaskets ) | |||||||||||||||||||||||||||||||||
| • High mechanical rubber articles | |||||||||||||||||||||||||||||||||
| • Automotive articles ( Muffler hanger ) body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Calibri"; font-size:x-small }
|
Additional Information:
Product Details:
| Certification | ROHS, SGS |
| Temperature Resistance | 200 Degree C |
| Type Of Product | Silicon Rubber Bar |
| Shore Hardness | 45 A |
| Elongation | 520 % |
| Material | High tear Strength Silicone Rubber |
| Tear-Strength | 23 N/mm |
| Tensile Strength | 7 M.Pa |
| Packaging Type | 20 Kg |
| Color | Transperant |
| Minimum Order Quantity | 1000 Kilogram |
| Color | Transparent |
| These products are specially designed for die casting silicone elastomers, in other words, roto | ||||||||||||||||||||||||||||||||||||
| casting and spin casting silicone elastomers. | ||||||||||||||||||||||||||||||||||||
| Characteristics | ||||||||||||||||||||||||||||||||||||
| • Excellent process ability | ||||||||||||||||||||||||||||||||||||
| • Enable to fill with quartz and pigment | ||||||||||||||||||||||||||||||||||||
| • High duty-cycle operation as casting mold | ||||||||||||||||||||||||||||||||||||
| • Good heat resistance with stabilizer SH0008B | ||||||||||||||||||||||||||||||||||||
| Applications | ||||||||||||||||||||||||||||||||||||
• Die-casting mold for jewelry, accessory etc
|
Additional Information: